DX-DRTVM114
7
STEP 3 -
Option 1: Attaching the mounting hardware to TVs
with a flat back
Note
: If you plan to use a 5° tilt with a larger TV (42”+), we suggest using spacers with the mounting
brackets so that the bottom of the TV does not touch the wall.
1
Align the left and right TV brackets (
B
and
C
) with the screw holes on the back of the TV. Make sure that
the brackets are level.
2
Install washers (
G
or
H
), and screws (
E
,
J
,
L
,
M
,
or
O
) into the holes in the back of the TV.
3
Tighten the screws until they are snug against the TV brackets. Do not over tighten.
You’ll need
or
or
or
J
or
H
E
L M
O
G
(4)
E
(4)
Phillips screwdriver
Screws
Washers
B
and
C
TV brackets
or
or
J
(4)
H
(4)
or
L
(4)
Level
or
O
(4)
M
(4)
or
DX-DRTVM114_13-0670_MAN_V1_ENG.fm Page 7 Monday, July 22, 2013 10:26 AM
