DynaVox Technologies
22
Insert Text -
If an Insert Text behavior is assigned to a button, the button’s text message will be
sent to the Message Window when the button is selected. The text will not be spoken until the
Message Window is selected. This behavior allows you to use text from more than one button to
create a unique message in the Message Window. When the Message Window is selected, the
whole message will be spoken by the device.
Remember that the button’s text may not be the same as its label. Text is not a visible part of a
button when you are looking at an active communication page. The label is often representative
of longer text. For example, a button may have
Hobbies
as a label. The actual text of the button
could be “Swimming and watching movies are my hobbies.” This text is added to the Message
Window when the Insert Text behavior is assigned to the button.
Speak Label -
When you select a symbol button that has a Speak Label behavior assigned to it,
the button’s label will be spoken by the device. The label will not be sent to the Message
Window.
Speak Text -
The Speak Text behavior will cause the device to automatically speak a button’s text
message when the button is selected. This text, which is added when the Speak Text behavior is
programmed into the button, will not be sent to the Message Window. This behavior enables you
to automatically speak lengthy messages without taking time to compose them in the Message
Window.
Be sure to keep these four behaviors in mind when you begin to use your device. When you select a
symbol button, note whether the device automatically speaks the button content. If the content is sent
to the Message Window but is not spoken immediately, simply select the Message Window to prompt the
device to speak.
Turning the Device On
1. Select the power button to the left of the touch
screen.
Turning the Device Off
1. Select the power button to the left of the touch
screen.
2. Select the
Yes
button to confirm that you want to
turn off the device.
Note:
This selection puts your device into a sleep state. Enough battery power will be used
to maintain the time and date settings. When you turn your device back on, you will
see the same page you were working on when you put the device to sleep.
Power Button
Содержание DV4
Страница 1: ......
