Page 8 of 126
198-0853-02 Rev F
2. Safety Precautions
Before proceeding any further through this manual, this section should be read thoroughly to
protect yourself and your equipment.
1. To properly operate this power supply, only electric cords with a 3-prong grounded system
are to be used.
2. The electric cord providing power to the machine should be plugged in only to a grounded
outlet that complies with U.L. and/or OSHA safety requirements, or local regulations.
3. If necessary to work inside the cabinet, remember to remove AC power before opening any
panels. Not doing so may endanger yourself and your equipment. The means of
disconnecting the power supply is either the removal of the detachable power supply cord
from the power inlet or power receptacle or both. If the power cord is direct connected to
the AC source as well as the power supply, turn off the local safety or power panel branch
breaker which provides AC to the power supply. Follow your lock out / tag out procedures
to ensure that power is not unexpectedly applied while servicing.
4. This unit contains no user serviceable parts. All repairs or modifications to this unit must be
done at the Dynatronix factory, or at an authorized Dynatronix Service Center, or by a
qualified service technician. See the Table of Contents section for a list of authorized
service centers in the USA and Europe.
5. If necessary to work inside of cabinet with power on DO NOT wear metal objects on hands
or wrists because of the various DC and AC voltages present.
6. If the equipment is used in a manner other than mentioned in this manual, the protection
provided by this equipment may be impaired.
C A U T I O N
TO REDUCE THE RISK OF ELECTRIC
SHOCK, UNIT MUST BE CONNECTED
TO EARTH GROUND.
REMOVE POWER BEFORE
OPENING PANELS.
SHOCK. UNIT MUST BE CONNECTED
TO EARTH GROUND.
REMOVE POWER BEFORE
OPENING PANELS.