INSTRUCTIONS : PR-2500-UD Cod : DYN 05.01.08
Date: 15/04/2016 Revision: 08
3
1 GENERAL INSTRUCTIONS
Each pair of safety gears supplied is factory tared according to the required conditions of use: Total mass
(P+Q) and guide rails’ thickness. These features are indelibly displayed, along with the standardisation
password and serial number; on the protection plates on top of the safety gear boxes (see section 2.1).
It is strictly forbidden:
a) To combine and assemble safety gear boxes with different serial numbers.
b) To use a pair of safety gears for installations with characteristics different from those indicated on that
pair of safety gears’ protection plates.
c) To handle any of the safety
gear’s components.
DYNATECH DYNAMICS & TECHNOLOGY, S.L. cannot be held responsible for the damage caused due to
the non-observance of any of these general instructions.
2 SAFETY GEAR IDENTIFICATION AND CHARACTERISATION
2.1 IDENTIFICATION
Figure 1: Safety gear identification
SAFETY GEAR IDENTIFICATION LABEL
1
Nº de certificado de examen U.E.de tipo
7
Guide rail type
2
Safety gear type
8
Safety gear serial number
3
Safety gear model
9
Dynatech address
4
Safety gears’maximum tripping speed (m/s)
10
Quality assurance CE marking and notified body
number
5
Total load (Kg)
11
Marking for market access to member states of the
Customs Union
6
Guide rail thickness (mm)
12
QR product traceability code
