English - 21 -
10.- TROUBLESHOOTING:
Before assuming that your transceiver is defective, perform the checks described in the following
table. If the problem persists, try to reset the transceiver because sometimes performing a reset, the
problems can be solved.
Problem
Cause/Possible solution
The transceiver doesn't turns on
when pressing on the power on
key.
- The battery pack is discharged. Replace with a fully charged battery
pack or proceed to charge the exhausted battery.
- The battery pack is not properly installed in the transceiver. Remove
and replace the battery pack in the transceiver.
The
battery
is
rapidly
exhausted.
- The battery pack life expires. Replace the battery pack with a new one
of the same characteristics as that supplied with the transceiver.
You can't talk or communicate
with other members of the
group.
- Make sure that you use the same CTCSS tone or DCS code as the
other members in your group.
- The other members of your group may we too far away. Make sure
you are within range of the other transceivers.
Other group communications
interfere in your group.
- Change the CTCSS/DTCS of your group. Be sure to change the
CTCSS/DCS on all transceivers in your group.
If after doing this checks, the transceiver still doesn't work properly, contact with the Authorized Technical
Service.
11.- TECHNICAL SPECIFICATIONS:
Frequency range:
144 MHz – 146 MHz (Tx & Rx).
80 MHz – 108 MHz (FM radio receiver only).
Channel number:
99 channels.
Transmission power:
4 W (H) / 1 W (L).
Channel spacing:
12.5 kHz.
Power supply:
7.4 V (Lithium battery).
Operating temperature:
-20 ºC to +60 ºC.
Modulation type:
F3E (FM).
Antenna impedance:
50
Ω
.
Duty cycle:
100 %.
Dimensions:
117 mm (H) x 60 mm (W) x 36 mm (D).
Weight:
205 gr (with battery and antenna).
Note:
- This transceiver is not changeable in their technical specifications by using the keyboard.
