Dynapac Svedala Demag EB 34 Series, Руководство по эксплуатации и техническому обслуживанию

Страница: 82 / 90

F 12
F_E
B
34_VB340
_05.
08_G
B.
fm
12-
18
7.2 Adjusting the flame
To ensure a perfect flame, the ignition
burner’s adjusting ring (3) will have to be
set.
- Unfasten locking screw of adjusting
ring.
- Adjusting ring should cover the four air
intake holes by approx. 50%.
- Retighten locking screw of adjusting
ring.
A
The flame should be bright blue on the
burner pipe.
- If necessary, undertake fine setting
using adjusting ring (3).
7.3 Injectors of the gas heater system
The injectors for preparing the gas/air
mixture are not subject to any mainte-
nance intervals.
Impurities in the propane gas may soil
the filter.
In this case, unscrew the screwed fitting
(4) and then the gas nozzle (5). The filter
is connected with the gas nozzle. Care-
fully clean the filter using air.
m
Never use a pointed object to clean the
gas nozzle and the filter since this could
damage the filter or the bore hole of the
gas nozzle.
A
The screwed fitting (4) and the gas noz-
zle (5) have been glued-in at the factory
using „Loctite blue“.
After cleaning, glue in the gas nozzle (5)
and the screwed fitting (4) and screw
them down.
f
Make sure that all gas pipe connections
are firmly screwed together.
Danger of explosions in case of leaks.
Gas2_340.wmf
2
Gas2_340.wmf/614_gaszünd.bmp
4
5