Dynapac LH800, Руководство по эксплуатации и техническому обслуживанию

Страница: 19 / 30

19 ILH800EN2
1. Stop the vibration, inactivated joystick (3).
2. Set the speed switch (2) to “low” (tortoise).
3. Let the engine idle a couple of minutes.
4. Push the start/stop switch (7) backward.
5. The buzzer sounds when the engine stops.
6. Open the rear hood and turn back the battery
disconnecter (14) so that the beeper is silenced.
7. Press the cut-off button (5) to switch off the
transmitter; the green indicator lamp goes out.
8. Put the transmitter in transport mode in the
machine, or keep it in a safe place.
9. Charge the transmitter battery after the day’s work
so that a fully-charged battery is always available.
Always store the transmitter securely to
prevent unauthorized starting of the
machine.
OPERATION – RADIO REMOTE CONTROL UNIT
The machine will immediately stop when the
emergency stop knob on the machine is
pressed. Make sure that the emergency
stops is always in working order.
The machine stops immediately when you
release the joystick. Make sure that the
joystick is working and that it returns to zero
mode on being released. The machine stops
immediately when the on/off switch on the
transmitter is turned off.
WARNING
WARNING
Transmitter
1. Push button to alter frequency
2. Speed switch, High/Low
3. Joystick
4. Transmitter indicator, On
5. Transmitter switch, On/Off
6. Low-battery indicator
7. Start/Stop switch, engine
8. Push button to alter frequency/browse
through values on the display
9. Battery
L000338A
1 2 3 4 5 6 7 8
9
Starting the engine
10. Transmitter
11. Antenna
12. Emergency stop knob
13. Receiver
14. Master switch
15. Buzzer
10 12 11 13 15 14
L000329A