manualshive.com logo in svg

Dynapac F1800C, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Dynapac F1800C Скачать руководство пользователя страница 205

D 40.18 13

1.2

Preparation for transportation

- Use switch (1) to close the hopper. 
- Engage both hopper transport safeguards.
- Lift the screed completely using switch (2), set the crossbeam lock.
- Turn the travel drive preselector (3) to zero.
- Fully extend the levelling cylinders with the switch (5).

A

To extend the levelling cylinders, levelling operating mode (6) must be switched to
"MANUAL" on the remote controls.

- Use switch (7) to adjust the screed to the basic width of the paver finisher.

m

Lift the auger if necessary!

A

If the engine is started with the drive lever swivelled, the travel drive is blocked. 
To be able to start the travel drive, the drive lever must first be returned to
the centre position.

Содержание F1800C





























































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды