Dynapac CP2700, Инструкция по эксплуатации

Страница: 103 / 113

Maintenance - Every 2,000 hours
2018-02-19 4812325557EN 99
Clean the water tank
Wash the water tank adding a small quantity of a suitable
detergent for plastic surfaces.
Close the drain cock (1), fill with water and check if there are
leakages.
The water tank is made of plastic
(polyethylene) and can be recycled.
Clean the sprinkler system
Keep in mind there are risks of freezing
components during a cold weather. Empty the
tanks, compartments, filters and tubes during such
period or mixed fluid with water and antifreeze.
The coa
rse filter is inside the frame’s upper compartment, on
the right side of the machine.
The filter housing (1) contains a drain cock (2) on the pumping
system, in the water tank. The tank and pumping system parts
can be drained through this cock.
The water hoses are connected to the pump with faster joints
(3) to make the draining process easier. If necessary, replace
the backup pump (if installed).
Fig. - Water tank
1. Drain cock
1
Fig. - Pump system
1. Filter housing
2. Closing cock
3. Fast joints
2
1
3