25
CC 100 M100EN1
LONG-TERM PARKING
Fig. 42 Weather-protected roller
The following directions must be followed
when parking the machine for longer
periods than one month.
The measures described apply for a standstill
of up to six months.
Before reusing the roller again the items
marked
❊
must be attended to.
❊
See the manufacturer’s instructions in the engine
manual that accompanies the roller.
❊
Remove the battery from the roller, clean the
outside, ensure that the electrolyte level is correct
and trickle-charge the battery once every month.
❊
Cover the air cleaner, or its intake opening, with
plastic foil or tape. Cover the opening of the exhaust
pipe. This must be done to prevent the penetration
of moisture into the engine.
Fill the fuel tank fully, ie, to prevent condensation
and rust.
Drain off any condense water from the hydraulic
reservoir
❊
Drain all water from the tank. Hoses, filter housing,
and water pump must also be drained. Remove all
sprinkler nozzles of the drum and wheels. Also
drain the emulsion tank and hoses, filter housing
and pump.
Lubricate the steering joint bearings, and both
bearings of the steering cylinder with grease. Coat
the piston rod of the steering cylinder with rust
preventive grease.
Also grease the hinges of the engine hood, seat
guides, revs control and both ends (bright parts) of
the forward/reverse control.
❊
Lower the instrument shield on the steering column.
Cover the whole machine with a tarpaulin.
NOTE: The tarpaulin must hang free from the gro-
und (see figure 42). Store the roller indoors if
possible, preferably at an even temperature.
Diesel engine
Battery
Air cleaner, exhaust pipe
Fuel tank
Hydraulic reservoir
Sprinkler system
Steering cylinder, hinges, etc.
Covers, tarpaulin
Содержание CC100
Страница 2: ......
