Dynapac CC 222, Руководство по обслуживанию

Страница: 18 / 33

16 CC 222/222C - CC 232/232C - CC 322 M222EN5
EVERY 50 HOURS OF OPERATION (Weekly)
Tires - Tire pressure
1. Check the tire pressure with a pressure gauge.
2. Make sure that the tires have equal pressure.
Recommended pressure: See Technical Specifications.
The figure shows the position of the air valve on the
outer tires.
1
Fig. 21 Outer wheel
1. Air valve
1
Fig. 22 Inner wheel
1. Air valve
The figure shows the position of the air valve on the
inner tires.
When pumping the tires, see the safety
manual that accompanies the roller.
Remove the rubber plug in the condenser hood while
the unit is operating and make sure through the sight
glass (1) that no bubbles are visible on the dryer filter. If
bubbles are visible through the sight glass, it is a sign
that the refrigerant level is too low. If so, stop the unit.
The unit may be damaged if it is run with insufficient
refrigerant.
Clean the condenser element free from dust as required.
Air conditioning
(Optional) - Inspection
Fig. 23 Air conditioning
1. Sight glass
1
WARNING