Dynapac CA282D, Инструкция по эксплуатации

Страница: 80 / 119

Maintenance - Maintenance schedule
ICA282-1EN3.pdf 2012-06-18
Remove all dirt before filling, when checking
oils and fuel and when lubricating using oil or
grease. Remove all dirt before filling, when checking
oils and fuel and when lubricating using oil or
grease.
The manufacturer’s instructions found in the
engine manual also apply. The manufacturer’s instructions found in the
engine manual also apply.
Every 10 hours of operation (Daily)
Refer to the contents to find the page number of the
sections referred to !
Pos. in fig Action Comment Pos. in fig Action Comment
Before starting up for the first time on that day Before starting up for the first time on that day
14 Check the scraper setting 14 Check the scraper setting
1 Check for free circulation of cooling air 1 Check for free circulation of cooling air
31 Check coolant level Refer to the engine manual 31 Check coolant level Refer to the engine manual
2 Check the engine oil level Refer to the engine manual 2 Check the engine oil level Refer to the engine manual
29 Refuel 29 Refuel
6 Check fluid level in hydraulic reservoir 6 Check fluid level in hydraulic reservoir
Test the brakes Test the brakes
After the FIRST 50 hours of operation
Refer to the contents to find the page number of the
sections referred to !
Pos. in fig Action Comment Pos. in fig Action Comment
2 Change the engine oil and oil filter Refer to the engine manual 2 Change the engine oil and oil filter Refer to the engine manual
3 Change the fuel filter Refer to the engine manual 3 Change the fuel filter Refer to the engine manual
8 Change the hydraulic fluid filter 8 Change the hydraulic fluid filter
12 Change the drum oil 12 Change the drum oil
70