Dynapac CA282D, Инструкция по эксплуатации

Страница: 51 / 119

Operation
ICA282-1EN3.pdf 2012-06-18
Operation
Before starting
Master switch - Switching on
1
Fig. Engine compartment
1. Master switch
Remember to carry out daily maintenance. Refer to
the maintenance instructions.
The master switch is located in the engine
compartment. Turn the key (1) to the on position. The
entire roller is now supplied with power.
The engine hood must be unlocked when
operating, so that the battery can be quickly
disconnected if necessary. The engine hood must be unlocked when
operating, so that the battery can be quickly
disconnected if necessary.
Operator’s seat - Adjusting
3
1
2
Fig. Operator's seat
1. Locking lever - Length adjustment
2. Lever - Weight adjustment
3. Locking lever - Steering column
angle
Adjust the operator’s seat so that the position is
comfortable and so that the controls are within easy
reach.
The seat can be adjusted as follows.
- Length adjustment (1)
- Weight adjustment (2)
Release locking lever (3) to adjust the steering
column. Lock in the new position.
Always make sure that the seat is secure before
beginning operation. Always make sure that the seat is secure before
beginning operation.
41