Dynapac CA152A, Руководство по обслуживанию

Страница: 10 / 37

8 CA152A M152AEN2
MAINTENANCE MEASURES
Item. in Measure See page Comments
fig. 1
Before the day’s first start
1 Check for free circulation of cooling air 10
35 Check coolant level 10 See engine manual
2 Check diesel engine oil level 11 See engine manual
33 Top up fuel tank 11
6 Check fluid level in hydraulic tank 11
Check brakes 12
Fill the water tank 12
15 Check scraper setting 14
Every 10 operating hours (daily)
Item. in Measure See page Comments
fig. 1
Check that hoses and couplings are not leaking
4 Clean the filter element of the air cleaner 15 Replace as required
18 Lubricate steering joint 16
19 Lubricate the steering cylinder brackets 16
24 Check the wheel-nuts are tightened 17
25 Check tire pressure 17
- Inspect the air conditioning 17 Optional
After the first 50 hours of operation change only the drum oil and all the oil filters.
Every 50 operating hours (weekly)
Periodic maintenance shall be carried out at the
specified intervals, that is to say either every day,
every week etc., or after the specified number of opera-
ting hours, whichever comes first.
Always first remove all exterior dirt before
filling up fluids etc., and before checking oil
and fuel levels, and also when lubricating with
grease or oil.
The engine manual specifies additional ser-
vice/maintenance instructions which relate to
the diesel engine.