Dynapac CA134 Скачать руководство пользователя страница 104

Страница: 104 / 106

Maintenance - 2000h

ICA134-3EN2.pdf

2012-04-13

Drum - Oil change

Figure. Drum, left side
1. Groove
2. Filler plug
3. Drain plug/Magnetic plug
4. Level plug

Position the roller on a flat surface with the groove (1)
on the inside of the drum aligned with the top of the
drum frame.

Place a receptacle that holds 10 liters (2.8 gal) under
the drain plug (3).

Clean and unscrew the filler plug (2) and drain plug
(3), and allow all the oil to run out.

Take great care when draining warm fluids and
oils. Wear protective gloves and goggles.

Save the oil and hand in to an
environment-friendly waste disposal station.

Clean and refit the drain plug (3) and fill with oil as per
"Drum - Checking the oil level".

Clean and refit the filler plug (2).

Steering joint - Check

Fig. Steering joint

Inspect the steering joint to detect any damage or
cracks.

Check and tighten any loose bolts.

Check also for any stiffness and play.

Содержание CA134











































































































Результаты поиска

Содержание CA134

Отзывы:

Похожие инструкции для CA134

Бренды по названию

Популярные бренды

Dynapac CA134, Инструкция по эксплуатации

Результаты поиска

Содержание CA134

Отзывы:

Похожие инструкции для CA134

Бренды по названию

Популярные бренды