Dynapac CA 251, Руководство по обслуживанию

Страница: 10 / 32

8 CA 251 M251-1EN1
MAINTENANCE MEASURES
Items in fig. 1 Measure See page Comments
20 Change the engine oil See engine instruction manual.
10 Change the engine oil filter See engine instruction manual.
22 Check the oil level in the rear
axle/planetary gearing
17
33,37 Check oil level in the drum/cassettes 17, 18
29 Check the oil level in the transfer gearbox 18
1 Check the oil level in the drum gearbox
(D and PD only)
18
18,21 Inspect bolted joints 19
31 Inspect the rubber elements 20
Every 250 hours of operation (monthly)
Every 500 hours of operation (every three months)
Items in fig. 1 Measure See page Comments
8 Change the hydraulic filter 20
Change the pre-fuel filter 21
11 Lubricate controls and pivoted joints 21
14,28 Clean the outside of the hydraulic cooler 21
Replace fuel filter See engine instruction manual.
Every 1000 hours of operation (every six months)
Items in fig. 1 Measure See page Comments
26 Drain condensation from the hydraulic reservoir 22
6 Replace breather filter on the hydraulic reservoir 22
19 Drain condensation from the fuel tank 22
9 Replace main filter in the air cleaner 23
Check belt tension of the fan and alternator See engine instruction manual.
Check engine valve clearance See engine instruction manual.
22 Change oil in the rear axle planetary gearing 23
22 Change oil the rear axle differential 24
Items in fig. 1 Measure See page Comments
26 Change the hydraulic fluid 25
29 Change oil in the transfer gearbox 25
2,37 Change oil in the drum/cassettes 25, 26
1 Change oil in the drum gearbox (D and PD only) 26
36 Clean the water tank (CA 251A) 27
38 Clean the emulsion tank 27
Every 2000 hours of operation (yearly)