INSTRUCTIONS MANUAL – BE10
File: 4700367199_ENG_NO.doc
Page 6 / 12
OPERATION
OPERATING SPEED
The max. speed of the engine must not exceeded 3000 r.p.m. It is settled in factory.
In case of maintenance operation on the engine this speed must be checked and eventually readjusted to
3000 r.p.m.
Refer to the engine instruction book provided for speed adjustment, starting and stopping the engine.
BEFORE STARTING
Do not run the engine in place with unsatisfactory ventilation.
Make sure that nothing easily combustible is in the vicinity of the exhaust outlet.
Check that there is gasoline in the tank.
Check that the engine oil level reaches up to the max level. Refer to the engine instruction book.
FUEL CHECKING
Do not refuel while smoking ,near an open flame or other potential hazards.
Stop the engine and open the cap.
Use gasoline only.
Close the fuel cock before filling the fuel tank.
When filling the fuel tank always use the fuel filter.
Wipe off any spilled fuel before starting the engine.
MAINTENANCE
CAUTION
Maintenance work must only be carried out by qualified people.
Always use original parts of the manufacturer.
The damaged parts must be changed immediately.
DAILY (EVERY 8 HOURS)
Clean engine. Check bolts and nuts.
Check and refill engine oil.
Check engine speed (3000 r.p.m.)
WEEKLY (EVERY 50 HOURS)
Change engine oil (initial 20 hours).
Clean air cleaner.
Check engine speed (3000 r.p.m.).
MONTHLY (EVERY 200 HOURS)
Clean fuel strainer.
Clean and adjust spark plug
Check engine speed (3000 r.p.m.)
EVERY 500 HOURS
Clean and adjust carburettor.
Clean cylinder head.
Adjust valve clearance.
