Installation, Operation and Service Manual
LKP Series 4 Channel OEM
© 2019 DynAmp, LLC
Page 1
041593O
1. HANDLING AND STORAGE
DynAmp products are engineered and manufactured for use in industrial environments.
However, they contain sensitive electronic and mechanical components which may be
damaged and fail if not handled and stored properly. All products must be handled and stored
with the same care as any precision measurement instrument. Severe bumps or jolts may
damage internal parts and cause malfunction or premature failure. DynAmp products are
designed and assembled with conformal coating, shock mounting, and environmental seals,
when appropriate or when specified. However, this protection requires that the product must be
properly installed and operational before the protection is fully functional. Therefore, adequate
protection from humidity, shock, and temperature must be provided during handling and storage
prior to installation.
The handling and storage of equipment must be sufficient to meet the storage temperature and
humidity specifications of the product and to prevent any condensation or contact with water or
any other liquid. The storage location and container or crate must provide adequate protection
from precipitation (rain, snow, ice) and direct water contact. Adequate shelter must be provided
to prevent the accumulation of precipitation (rain, snow, ice) and water which can lead to the
deterioration or failure of shipping containers or crates and cause water ingress. Storage in
coastal or industrial areas subject to salt-laden or corrosive air or areas of wind-driven sand or
other abrasive dust must be adequate to prevent the deterioration or failure of shipping
containers or crates and cause ingress. Frequent inspection of storage areas and storage
containers or crates is required to ensure proper storage conditions are being maintained.
If the shipping container or crate is opened and/or the equipment is removed for inspection prior
to installation, the equipment must be repackaged in the original undamaged container or crate
in the same manner as it was shipped to prevent environmental damage or placed in a storage
location that meets the required environmental and storage conditions.
General product storage temperature and humidity requirements:
Storage Temperature:
-40 to 70°C
-40 to 158°F
Storage Humidity:
Maximum 85%, non-condensing
DynAmp, LLC does not assume liability for the customer’s failure to comply with handling and
storage requirements.
For further assistance, contact DynAmp customer support.
