Dynamix RC 903-V35FE1 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 26

Dynamix RC 903-V35FE1 Скачать руководство пользователя страница 15

Local

Converter

Local

Converter

Remote

Converter

Local

Converter

Remote

Converter

5.6

th

7

th

and 8

th

bit: selecting switch of the loop-back type (default OFF)

6

th

bit

7

th

bit

8

th

bit

ON

Local V35

interface loop-back

Local E1 line

loop-back

Remote E1 line

loop-back

OFF

No loop-back

No loop-back

No loop-back

The loop-back test function is the assistant function for the user to adjust equipment
and test the link. The client could set the type of loop-back according to different
needs to realize different test functions.

(1) Local V.35 interface loop-back test ALOOP

DTE or V.35 bit

error teste

r

V.35

E1Channel

As shown in the above figure, user can set the fractional/transparent mode, related clock
mode and bandwidth of the local converter. If the local V.35 loop-back is successful,
LOOP indicator is ON. When the Router connecting to the local equipment is checking the
interface, the loop-back status could be shown. The local V.35 interface loop-back test is
usually used to test whether the connection of V.35 cable is all right, whether the Router
interface has started working, and whether the clock and data phase relation between
Converter and Router is right or not and so on.

(2) Local E1 line loop-back test DLOOP

DTE

V.35

E1Channa

l

V.35

DTE orV.35bit

error tester

As shown in the above figure, user can set the fractional/transparent mode, related
clock mode and bandwidth of the local converter. If the local E1 line loop-back is
successful, the LOOP indicator is ON. When the Router at the remote site is
checking the interface; the loop-back status could be shown. The loop-back test at
the local E1 line is usually used to check whether the V.35 cable at the remote site
is connected correctly or not, the Router interface at the remote site has started
working or not, and the clock and data phase relation between the Converter and
Router at the remote site is right or not and so no.

(3) E1 line loop-back at the remote site RLOOP

DTEorV.35 Bit

error Tester

V.35

E1Chann

el

To realize the E1 line loop-back at the remote site, the following pre-conditions must
be guaranteed:
1) This equipment is used point to point in pairs.

14

«
...
13
14
15
16
17
...
»

Содержание RC 903-V35FE1



























Отзывы:

Нет отзывов