background image

2Giga Ethernet Managed 4 Band VDSL IP DSLAM USER’S MANUAL Ver. A.4 

                                                                 

                                         

4

                                                               

Dynamix DV-24

 VDSL IP DSLAM provides the important features necessary for robust networks: 

 

Quality of Service:

 Supports 802.1p QoS. Provides high-and low-priority queuing on a per-port basis. 

 

Supports IGMP:

 Snooping by 512 IP multicast table for VOD (Video on demand) and Video Conference and Internet games 

application. 

 

Scalability:

 Supports bandwidth control from 100k to

 5/15/25 

Mbps symmetric performance over single-pair wiring. Fast 

Ethernet Channel port aggregation. 

 

Security: 802.1Q

 

Tag base

 and

 port-based

 virtual local-area network (VLAN) support. Private VLAN access, assuring port 

security without requiring a VLAN per port, and also 

supports MAC filtering to Lock MAC address and 802.1V 

Protocol V-LAN

   

 

In-Band Management: 

 Dynamix DV-24 provides a console port for setup IP or other function 

 

Out of Band Management:

 24 ports VDSL IP DSLAM support remote control by Telnet and Web-based Management 

easy-to-use configuration and ongoing monitoring. This software is embedded in the DV-24 
VDSL IP DSLAM and delivers remote, intuitive management of 24 ports VDSL IP DSLAM and 
connected VDSL CPE devices through a single IP address. The 24 ports VDSL IP DSLAM is 
easy-to-configured and deployed, and offering a compelling option in terms of cost, 
performance, scalability and services compared to traditional ATM-based xDSL solutions.

 

 

 

Speed Rate Control: 

 Dynamix DV-24 VDSL IP DSLAM supports speed rate control function, from 100kbps to 5/15/25Mbps.

 

 

 

IEEE-802.1x: 

port base network access control, this function for wireless users connecting Authentication 

 

Spanning tree: 

Supports IEEE802.1d for MAC bridge and link redundant. 

 

DHCP Client: 

Dynamic Host Configuration Protocol (DHCP) for auto configuration management IP. 

 

TFTP Protocol:

 Trivial File Transfer Protocol (TFTP)

 

for new version firmware remote upgraded 

 

SNR indication: 

Signal to Noise Ratio (SNR) for check phone wiring quality and cross talk for offering wiring information to 

engineer. 

Содержание DV-24
























































































Отзывы: