Dynamic IVM6000-LP, Быстрый старт

Страница: 21 / 27

ADMIN.MENU / POWER Sub-menu
The POWER sub-menu is accessed from the ADMIN MENU.
1. Standby: This sets the amount of time to wait before going into “Standby mode”.
When in standby, all essential functions are running, but the LCD display
is switched off to conserve power and LCD longevity. Default value is 30
seconds (00:30).
In this example (with Standby set equal to 00:00), the IVM will never enter
standby mode and the LCD display will stay on all the time. To wake from
standby, press any button.
2. Wake: If this is set to YES, the unit will wake up from Standby mode and turn on
the LCD if there is any activity on the valve.
This can be useful when at
site watching for valve activity.
NOTE: Wake mode will turn itself off after 30 minutes of use.
3. Backlight: Choose from: “OFF” “MED” “ON”. This sets the LCD display backlight
brightness. The backlight illuminates the screen for easier viewing.
4. Save: Save the current configuration after making changes.
Select “SAVE” then “OK” , twice, after making any changes.
*saved* will appear briefly on the screen to confirm your changes are saved.
Oct 2020 IVM6000-LP TM Quick Start Guide Page 19
WAKE
BACKLIGHT
SAVE
POWER MENU
STANDBY 00:00
OFF
ON
Keypad functions
UP/DOWN: Change value/menu item
OK:
Confirm value/Select menu item
PAGE: Go to next screen
1. Standby
2. Wake
3. Backlight
4. Save