Dynamic DX 12V Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 33

Dynamic DX 12V Скачать руководство пользователя страница 15

No. 60011, Issue 8. October 1998

5 Installation

12

To DX

Power

Module

Two DXBUS Connectors

Not

Connected

5.3.3

DXBUS Connections

Note

When only one DXBUS

connector is used on the 12VLM
and the remaining connector is
accessible to the wheelchair user, a
dummy plug should be fitted to the
unused connector. This will comply
with ISO7176.

Like all DX Modules, the 12VLM is connected to the DX system using the
DXBUS. Unlike most other DX Modules, in order to be TÜV compliant, the
12VLM does not have its power supplied via the DXBUS. The 12VLM uses the
DXBUS for communications only and the two power conductors are unused.

The DXBUS cables are available in the following standard lengths:

DXBUS CABLE, Straight, 0.12 M

Part/Order Number GSM 630012

DXBUS CABLE, Straight, 0.3 M

Part/Order Number GSM 63003

DXBUS CABLE, Straight, 0.5 M

Part/Order Number GSM 63005

DXBUS CABLE, Straight, 1.0 M

Part/Order Number GSM 63010

DXBUS CABLE, Straight, 1.5 M

Part/Order Number GSM 63015

Other cable lengths in multiples of 0.1 m are available on request.

DXBUS cables are also available fitted with a ferrite bead to improve
Electromagnetic Compatibility (EMC).

DXBUS CABLE, Ferrite, 2.0 M

Part/Order Number GSM 63020F

Note :

The correct positioning of the 12VLM within the DX system is required for

TÜV compliance.

«
...
13
14
15
16
17
...
»

Содержание DX 12V


































Отзывы:

Нет отзывов