Dynamic Mounting Down and Out Motor Mount, Руководство по установке

Страница: 2 / 16

Install Video at www.DynamicMounting.com/Install 2 2
CAUTION:
These wall mounting instructions and hardware are for mounting to wood studs only. It is up to you to verify that
the material supplied will work for your setup; other materials may need to be purchased by you. For concrete, brick or other
mounting materials consult an expert.
Consult your TV’s owner manual before mounting your television, it contains relevant information.
Tools Needed

7/16” open ended wrench

1/2" open ended wrench

9/16” box or ratchet wrench

1/4" Drill Bit

Drill

Tape Measure

Stud Finder

Level

Phillips Screwdrivers

A friend or 2, depending on how
heavy your television is
Parts Included

1 Down and Out Motor Mount (Fixed or Swivel)

1 Wall Frame (unless ordered Single Stud Only)

2 Auto-Locking TV Hangers

2 Paintable Plastic Covers

1 RF Remote Control

1 Remote Control Holder with screws and anchors

2 AAA Batteries

1 IR Remote Control with Battery
Various Items (All in One Bag)

4 3/8” by 3” long lag screw with washer

4 Lag Screw Cover

4 Washer for Lag Screw Cover

4 Zip Ties

2 Sticky L-grips for covers
Fasteners for Mounting the Television to the TV Hangers
(All in One Bag)

4 M6 x 20 mm (.78”) long Phillips head machine screw

4 M6 x 35 mm (1.38”) long Phillips head machine screw

4 M8 x 20 mm (.78”) long Phillips head machine screw

4 M8 x 35 mm (1.38”) long Phillips head machine screw

4 1/4" tall plastic spacers

8 .1” tall plastic spacers

4 Steel M6 washers
Table of Contents
Swivel Version ..................................................................... 5
Swivel Cam Adjust .............................................................. 5
Determining Where to Put Mount ........................................ 6
Attaching TV Hangers to Television ................................... 6
Conditions for Mounting the Frame to the Wall .................. 7
Mounting Frame to Wall ...................................................... 7
Attaching Mount to Frame ................................................... 7
Conditions for Mounting Single Stud to the Wall................ 8
Mounting Single Stud to the Wall ........................................ 8
Attaching the Television to the Mount................................. 9
TV Level .............................................................................. 9
RF Remote Control ............................................................ 10
IR Remote Control ............................................................. 10
Remote Control Buttons ..................................................... 10
Automatically Move to Position ......................................... 10
Preventing Mount from Hitting Shelf ................................. 10
Above Shelf Mounting ....................................................... 13
Tips to get the Lowest Possible Bottom Position ............... 13
Setting the Tilt in the Bottom and Out Positions ................ 14
Setting the Tilt in the Top Position ..................................... 14
Wire Management .............................................................. 14
Paintable Plastic Covers ..................................................... 15
Maintenance ....................... Error! Bookmark not defined.
Lifetime Limited Warranty . Error! Bookmark not defined.
These Directions are for the Down and Out Motor, Fixed and Swivel Mount, on the Frame or Single Stud (No Frame) Version.

Figure 1 is the overview with the Frame

Figure 5 is the overview of the Single Stud

Page 5 is for the Swivel Mount only

Page 7 shows how to mount the Frame to the wall

Page 8 shows how to mount the Single Stud, without Frame, to the wall.