Dynalink 128K, Быстрый старт

Страница: 35 / 128

ENGLISH
To insert the ISDN Adapter, you have to open the case of the computer. Be careful
and do not open the case while the computer is connected to the mains. Power
down the PC and pull the plug out of the socket before installing the card.
Both the ISDN Adapter and the computer are easily damaged by static electricity.
Before proceeding, you must discharge any static electricity present in your body by
touching a grounded metal surface.
IMPORTANT: Before installing the card, check the manual supplied with your
computer for specific instructions on the use of the expansion slots.
10. Remove the screws that secure the cover of the computer. See the manual of
the computer for the exact procedure. Remove the cover and set it aside.
11. Find an empty 32-bit PCI expansion slot for the card.
12. Remove the screw that secures the protective cover of the expansion slot. Keep
the screw at hand; you will need it again to secure the ISDN adapter.
13. Also keep the cover plate of the slot for future use.
14. Insert the card into the empty slot, contacts edge first. Press the card down until
it is firmly seated.
15. Secure the card using the screw you have kept for this purpose.
16. Close the computer case and replace and tighten the screws.
Then boot up your system and follow the instructions in chapter 4: software / driver
installation
B: Installation of the PCMCIA ISDN Adapter
Place the PCMCIA Adapter in the notebook type II slot..
4. Software Installation
The following driver installation procedure may be slightly different from the
installation on your computer. This depends on the Windows version you are using.