DynaGen OPT2600-2-120/240V, Инструкция по установке и эксплуатации

Страница: 13 / 22

13
5: RECOMMENDED MAINTENANCE
WARNING: When performing any maintenance of the mechanism,
isolate the transfer switch from all possible sources of
power.
The OPT2600 transfer switch assembly has been designed to require minimum attention
under all environmental conditions normally encountered. All sliding and bearing
surfaces have a thin coating of grease applied at the factory. This thin coating minimizes
accumulation of dust and grit at these locations. The gear-motor is also lubricated for the
life of the unit, and requires no attention.
Periodically inspect all terminals (load, line and control), and all fasteners for tightness.
Test the transfer switch operation upon initial installation, in both the motor and manual
modes. Periodically check for freedom of movement of the mechanism, hidden dirt or
corrosion, and any excessive wear on the mechanical operating parts. Clean or replace
parts when necessary.
All transfer switch parts are made of corrosion resistant material or is plated, coated or
painted for corrosion protection.
User Manual for the OPT2600 Series
Automatic
Transfer Switch