Dynafit BEAST, Инструкция пользователя

Страница: 3 / 19

THANK YOU FOR CHOOSING DYNAFIT SKI BOOTS!!
DYNAFIT ski boots are engineered and produced to meet the highest industry standards
in both performance and quality. With the quality of materials used and the dynamic
performance-oriented functions, every boot is specifically designed to cater to the needs
of an AT skier. Within our collection you will surely find the right boot to satisfy your
backcountry needs. For your own safety and knowledge, we ask that you please read and
review the following user manual.
ATTENTION ALL USERS!
PLEASE RECOGNIZE THAT SKIING, AMONG MANY OTHER OUTDOOR ACTIVITIES, CAN
BE DANGEROUS. PLEASE BE AWARE AND EXERCISE CAUTION.
For your safety we recommend that you replace the shells of your boots (regardless of
brand) after approximately 5 years. Please keep in mind that depending on use, care, and
treatment of your boots, this time span may vary.
INSTRUCTIONS FOR USE:
NOTE: for any questions regarding or relating to the proper fitting or use of the boot,
please consult an authorized DYNAFIT dealer.
HOW TO PUT ON THE BEAST:
1. Completely open all 4 buckles on the boot and unlock the Precision Lock System walk
mechanism by rotating the rear lever downwards;
2. Insert foot into the liner, assisting insertion by holding open the shell wings as much
as possible, using the eyelet on the wings to help you.
3. Once your foot is inserted, position the liner tongue correctly (if necessary, lace up, if
you have chosen to use the laces supplied in the box);
4. Proceed with the closure and adjustment of the buckles.
WARNING: Make sure that the black snow seal on the upper part of the shell is not trapped
by the shell wings; it should be correctly positioned between the upper and lower wings.
engli
sh