Dynacord DPC 8000, Руководство пользователя

Страница: 21 / 38

User menu
Program selection
The call station allows programs to be assigned to individual circuits or groups of the
PROMATRIX 8000 system. Program transfer has the lowest priority. With single-program
technology, the music must be muted or switched off in all circuits for the duration of an
announcement. With dual-program technology, music can still be played in rooms where no
announcement is being made. If a separate NF output and amplifier is available for each line,
announcements and background music can be transmitted completely independently of each
other. Pressing the
↵
button takes the user to the Programs submenu. The entries contained
in this submenu are described below.
Program X
A list of the programs assigned to the call station in IRIS-Net is displayed. Pressing the
↑
or
↓
button toggles between the programs. If zones have already been assigned to the program,
the green LEDs on the selection buttons show the selected circuits/groups.
By pressing the selection buttons, the required circuits/groups can be selected. This is
indicated by the corresponding green LEDs.
i
Notice!
The zone assignment is immediately accepted in the PROMATRIX 8000 system.
The assignment remains valid until the selection buttons are pressed repeatedly. If the yellow
LED of a selection button illuminates, the program cannot be assigned to this circuit or group
for topological reasons.
Pressing the
↵
button takes the user to the Volume X submenu, which is described below.
Volume X
The volume currently set in the program is displayed. Pressing the
↑
or
↓
button sets the
volume of the program. The volume level is increased or decreased in 1 dB steps. Pressing and
holding the
↑
or
↓
buttons continuously increases or decreases the volume.
i
Notice!
The new volume level is immediately accepted in the PROMATRIX 8000 system.
Pressing the
↵
button accepts the setting selected, and returns the user to the Program X
menu.
Opening gong
An opening gong can be programmed for announcements. In announcement mode, the
opening gong is transmitted to the selected circuits each time the
↵
button is pressed. The
announcement can begin during the opening gong, meaning that the announcer can "interrupt"
the gong. Pressing the
↵
button takes the user to the Opening Gong submenu. The current
setting of the opening gong ("on" or "off") is displayed. Pressing the
↑
or
↓
buttons toggles
between these two statuses. Pressing the
↵
button accepts the setting selected, and returns
the user to the User menu.
7.1
DPC 8000 Configuration | en 21
28-Feb-2013 | |