Dynacord DMM 4650 Скачать руководство пользователя страница 31

Страница: 31 / 55

Outputs:

Max. output current (relay contacts):

24VDC

0.5A

5OVDC

Installation example:

Installation example with factory presets: see also ”Factory preset sequences” page 36 - 44

INPUTS:

All input signals must be applied longer than 200 msec. in orderto be securely recognized. Modifying this default is
possible in the menu ”Trigge@’.

Release signal:

Input for re-confirmation signal, whether the unit (power amplifiers) is ready

General Stop:

Input (impulse); interrupts all currently running sequences

Alarm text:

Input (impulse) for playback alarm message (MOO)

DIN alarm:

Input (impulse) for infinite DIN alarm (siren 1200 Hz - 500 Hz).

DIN alarm:

Key pressed for DIN alarm on, key released terminates the alarm

DIN alarm text:

Key pressed starts sequence, DIN alarm, 1 sec pause, alarm text (MOO),
1 sec pause, DIN alarm, etc., key released terminates the sequence.

4-tone gong:

Input (impulse) starts a 4-tone gong (G20).

Pre-gong:

Input (static), key pressed starts pre-gong and enables announcement via
DMM 4650, key released terminates the sequence.

OUTPUTS:

All outputs are floating relay contacts.
Al

System on:

Switches on the electro acoustics sound reinforcement system.

Alarm text running:

Signaling contact for alarm text active.

Alarm signal running:

Signaling contact for alarm signal active.

4-tone gong running:

Signaling contact for 4-tone @g active.

Pre-gong running:

Signaling contact for pre-gong active.

Mandatory relay E:

Switches the sound reinforcement system to mandatory reception (E).

Mandatory relay D:

Switches the sound reinforcement system to mandatory reception (D).

Program off:

Switches current music program off.

Содержание DMM 4650
























































Результаты поиска

Содержание DMM 4650

Отзывы:

Похожие инструкции для DMM 4650

Бренды по названию

Популярные бренды

Dynacord DMM 4650, Руководство пользователя

Результаты поиска

Содержание DMM 4650

Отзывы:

Похожие инструкции для DMM 4650

Бренды по названию

Популярные бренды