Installation Guide
29
STEP 5
Fix the Mount with three screws.
STEP 6
Remove the Optical Cover of the Dome Camera.
STEP 7
Connect the Data Cable and/or
Ethernet cable through the
central hole of the Mount to the
Dome Camera’s corresponding
connector.
NOTE:
If use the network
Speed Dome Camera, an
Ethernet cable is needed
other than the Data
Cable.
STEP 8
Attach the Dome Camera to the
Mount and rotate it clockwise.
Make sure that the central part
of camera bottom is locked into
the central hole of the Mount.
Ensure that the Fixing Plate
aligns with its mating screw hole
on the Mount as shown in the
figure.
