Installation
Guide
18
Insert the terminal into the pin holes
on the connector housing, with the
hook outward, as indicated in the
figure.
To unlock the terminal, press the
hook, as indicated in the figure, with
a proper tool and pull it out gently.
Connect the 22-pin connector to its
mating port on the back plate of the
Dome
Camera
.
NOTE:
The figure on the
right side is for illustration
only. Please refer to section
3.1.1 Switch Definition
for
correct back plate layout.
3.2.6
Ethernet Cable Connection
Connect one end of the CAT5 Ethernet cable to the RJ-45 connector of the
network Speed Dome Camera, and the other end of the cable to the network
switch or PC.
NOTE:
In some cases, you may need use an Ethernet crossover
cable when connecting the network Speed Dome Camera directly to
the PC.
