Dynabrade Dynabug 57810, Руководство пользователя

Страница: 8 / 68

Using the Examples in This Manual
If you want to use the examples in this manual, you can use the
load merge
or the
load
merge relative
command. These commands cause the software to merge the incoming
configuration into the current candidate configuration. The example does not become
active until you commit the candidate configuration.
If the example configuration contains the top level of the hierarchy (or multiple
hierarchies), the example is a
full example . In this case, use the
load merge
command.
If the example configuration does not start at the top level of the hierarchy, the example
is a
snippet . In this case, use the
load merge relative
command. These procedures are
described in the following sections.
Merging a Full Example
To merge a full example, follow these steps:
1.
From the HTML or PDF version of the manual, copy a configuration example into a
text file, save the file with a name, and copy the file to a directory on your routing
platform.
For example, copy the following configuration to a file and name the file
ex-script.conf
.
Copy the
ex-script.conf
file to the
/var/tmp
directory on your routing platform.
system {
scripts {
commit {
file ex-script.xsl;
}
}
}
interfaces {
fxp0 {
disable;
unit 0 {
family inet {
address 10.0.0.1/24;
}
}
}
}
2.
Merge the contents of the file into your routing platform configuration by issuing the
load merge configuration mode command:
[edit]
user@host#
load merge /var/tmp/ex-script.conf
load complete
Copyright © 2014, Juniper Networks, Inc. viii
Time Management Administration Guide for Routing Devices