Dynabrade Dynabug 57810, Руководство пользователя

Страница: 33 / 68

# bin
# get tzdata-latest.tar.gz
NOTE: If needed, you can edit the above untarred files to create or modify
the time zones.
5.
Select the names of time zone files to compile and feed them to the following script.
For example, to generate
northamerica
and
asia
tz files:
# /usr/libexec/ui/compile-tz northamerica asia
6.
Enable the use of the generated tz files using the CLI:
[edit]
#
set system use-imported-time-zones
[edit]
#
set system time-zone ?
This should show the newly generated tz files in /var/db/zoneinfo/ .
7.
Set the time zone and commit the configuration:
[edit]
#
set system time-zone <your-time-zone>
# commit
8.
Verify that the time zone change has taken effect:
[edit]
#
run show system uptime
Configuring a Custom Time Zone
To use a custom time zone, follow these steps:
1.
Download a time zones archive (from a known or designated source) to the router or
switch. Compile the time zone archive using the
zic time zone compiler, which generates
tz files.
2.
Using the CLI, configure the router or switch to enable the use of the generated tz files
as follows:
[edit]
user@host#
set system use-imported-time-zones
3.
Display the imported time zones (saved in the directory /var/db/zoneinfo/ ):
[edit]
user@host#
set system time-zone ?
If you do not configure the router to use imported time zones, the Junos OS default
time zones are shown (saved in the directory
/usr/share/zoneinfo/
).
Related
Documentation
•
Modifying the Default Time Zone for a Router or Switch Running Junos OS on page 12
•
NTP Overview on page 3
•
Understanding NTP Time Servers on page 5
21 Copyright © 2014, Juniper Networks, Inc.
Chapter 2: Configuring Time