Dynabrade Dynabug 57810, Руководство пользователя

Страница: 49 / 68

source-address (NTP, RADIUS, System Logging, or )
Syntax source-address source-address;
Hierarchy Level [edit system accounting destination radius server server-address],
[edit system accounting destination tacplus server server-address],
[edit system
ntp ],
[edit system radius-server server-address],
[edit system syslog],
[edit system tacplus-server server-address]
Release Information Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Description Specify a source address for each configured IPv4 or IPv6 server, RADIUS
server, NTP server, or the source address to record in system log messages that are
directed to a remote machine.
Options
source-address
—A valid IP address configured on one of the router or switch interfaces.
For system logging, the address is recorded as the message source in messages sent
to the remote machines specified in all
host hostname
statements at the
[edit system syslog]
hierarchy level, but not for messages directed to the other
Routing Engine or to the TX Matrix router or TX Matrix Plus router in a routing matrix
based on a TX Matrix router or TX Matrix Plus router.
Required Privilege
Level
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Related
Documentation
•
Configuring RADIUS Authentication
•
Specifying a Source Address for an NTP Server on page 13
•
Specifying an Alternative Source Address for System Log Messages
37 Copyright © 2014, Juniper Networks, Inc.
Chapter 3: Configuration Statements