dymax UVC-5, Руководство пользователя

Страница: 18 / 20

1 7 USE R GUI DE | UVC -5 CONVE Y OR
9. Troubleshooting
Problem Possible Cause
There is no reaction after
having switched on the
transport belt Check the power plug
Check the fuse in the connector plug
The UV bulb is not ignited once
the key UV-ON (4) has been
pressed
Switch on the transport belt
Lamp has not cooled down sufficiently yet
UV bulb is defective
After a long operating period,
the UV bulb is switched off
automatically Lamp is overheated - check whether the air outlets are free and clean
Ambient temperature is too high
UV curing result is not sufficient
UV bulb is used up
The belt speed is too fast
10. Appendix
10.1 EC Declaration of Incorporation (A) according to the EC Machinery Directive 2006/42/EC dated 17 May
2006, appendix II 1.B
Warranty
From date of purchase, Dymax Corporation offers a one-year warranty against defects in material and
workmanship on all system components with proof of purchase and purchase date. Unauthorized repair,
modification, or improper use of equipment may void your warranty benefits. The use of aftermarket replacement
parts not supplied or approved by Dymax Corporation, will void any effective warranties and may result in
damage to the equipment.
Replacement Bulb Warranty
If the bulb fails to ignite during the warranty period of 500 hours and all bulb history cards for a specific
UVC-5
have been returned to Dymax, the bulb will be replaced under warranty.
IMPORTANT NOTE:
DYMAX CORPORATION RESERVES THE RIGHT TO INVALIDATE ANY WARRANTIES, EXPRESSED OR
IMPLIED, DUE TO ANY REPAIRS PERFORMED OR ATTEMPTED ON DYMAX EQUIPMENT WITHOUT WRITTEN AUTHORIZATION
FROM DYMAX. THOSE CORRECTIVE ACTIONS LISTED ABOVE ARE LIMITED TO THIS AUTHORIZATION.