9
Dymax ECE Series UV Flood-Lamp Systems User Guide
Assembly and Setup
Unpacking and Inspecting Your Shipment
When your ECE flood-lamp system arrives, inspect the boxes for damage and immediately notify the
shipper of any box damage.
Open each box and check for equipment damage. If parts are damaged, notify the shipper and submit a
claim for the damaged parts. Contact Dymax so that new parts can be shipped to you immediately.
Check that the parts included in your order match those listed below. If parts are missing, contact your
local Dymax representative or Dymax Customer Support to resolve the problem.
Parts Included in an ECE UV Light-Curing Flood-Lamp System
Refer to Figure 3.
ECE 2000 (PN 40835) or 5000 (PN 40845) Lamp/Reflector Assembly Housing (1)
- Contains the
reflector, UV lamp, lamp sockets, high-voltage starter, and three circular connectors.
Interconnection Cable (2)
–
PN 40695 - Connects the power supply to the lamp/reflector assembly
housing.
Power Cord (3)
–
Dependent on model ordered. Available options listed below:
o
Standard North American Power Cord (PN 41601)
o
Type G Power Cord (PN 41606)
o
No Power Cord (Note: For European customers, the appropriate power cord will be added)
Solid-State Power Supply (4)
ECE Light Shield (5)
PN 40785
ECE
ZIP
Shutter (6)
PN 40885
Goggles (7)
PN 35285
Two Interconnect Cables (8)
o
PN 40879 - Connects the lamp/reflector housing to the
ZIP shutter
o
PN 40878 - Connects the lamp/reflector housing to the ECE light shield.
Footswitch (9)
PN 36051
UV Bulb
–
PN 38560 - 400 watt, metal halide. Optional visible (PN 36658) or mercury vapor (PN 36970)
bulbs available.
Dymax ECE Series UV Flood-Lamp Systems User Guide
(Not Shown)
