manualshive.com logo in svg

dymax BlueWave LED VisiCure 41062, Руководство пользователя

Поделиться
Скачать
dymax BlueWave LED VisiCure 41062 Скачать руководство пользователя страница 24

 

© 2013-2017 Dymax Corporation.  All rights reserved.  All trademarks in this guide, except where noted, are the property of, or used under license by Dymax Corporation, U.S.A. 

The data contained in this bulletin is of a general nature and is based on laboratory test conditions.  Dymax Europe GmbH does not warrant the data contained in this bulletin.  Any warranty applicable to products, its application and use is strictly limited to that contained in Dymax 
Europe GmbH’s General Terms and Conditions of Sale published on our homepage 

www.dymax.com/de/pdf/dymax_europe_general_terms_and_conditions_of_sale.pdf

.  Dymax Europe GmbH does not assume any responsibility for test or performance results obtained by users.  It is 

the user’s responsibility to determine the suitability for the product application and purposes and the suitability for use in the user’s intended manufacturing apparatus and methods. The user should adopt such precautions and use guidelines as may be reasonably advisable or 
necessary for the protection of property and persons. Nothing in this bulletin shall act as a representation that the product use or application will not infringe a patent owned by someone other than Dymax Corporation or act as a grant of license under any Dymax Corporation Patent. 
Dymax Europe GmbH recommends that each user adequately test its proposed use and application of the products before actual repetitive use, using the data contained in this bulletin as a general guide.                  

 

PN41065    

MAN056EU   

 3/30/2017 

 

 

Dymax Corporation 
+1.860.482.1010 | [email protected] | 

www.dymax.com 

 

Dymax Oligomers & Coatings 
+1.860.626.7006 | [email protected] | 

www.dymax-oc.com

 

 

Dymax Asia (H.K.) Limited 
+852.2460.7038 | [email protected] | 

www.dymax.com.cn

 

Dymax Europe GmbH 
+49 (0) 611.962.7900 | [email protected] | 

www.dymax.de 

 

Dymax UV Adhesives & Equipment (Shanghai) Co. Ltd.        
+86.21.37285759 | [email protected] | 

www.dymax.com.cn 

Dymax Asia Pacific Pte. Ltd. 
+65.6752.2887 | [email protected] | 

www.dymax-ap.com 

Dymax Engineering Adhesives Ireland Ltd. 
+353 21.237.3016 | [email protected] | 

www.dymax.ie

  

Dymax UV Adhesives & Equipment (Shenzhen) Co. Ltd. 
+86.755.83485759 | [email protected] | 

www.dymax.com.cn

 

Dymax Korea LLC 
+82.2.784.3434 | [email protected] | 

www.dymax.com/kr

 

 

 

 

 

 

 

 

 

 

Содержание BlueWave LED VisiCure 41062

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды