Storage
WARNING:
Never store the DYE
®
i
3
™ Goggle system in areas that
may have chemical fumes. Gasoline, kerosene, alcohol and other
chemicals and fumes will weaken the lens and goggle.
WARNING:
Never store your DYE
®
i
3
™ Goggle system in areas of
extreme heat or cold. Temperature extremes will damage the lens and
the goggle. Store your goggle in a cool, well-ventilated place.
•
Store your goggle in a cool, well-ventilated place free from any
kind of industrial or household fumes.
•
Do not store your goggle with dirty lenses or frames.
•
Do not allow a dirty goggle to sit overnight without cleaning.
•
Do not expose your goggle frame or lens to harmful household
or industrial fumes.
•
Do not store your goggle in plastic garbage cans,
garbage bags, or any plastic container.
•
Do not store your goggle in the trunk of your car.
•
Do not store your goggle in direct sunlight or near heaters,
stoves or other heat sources.
13
Removing the Lens
[Lens replacement is easier if the visor is first removed from the goggle frame.]
Tip:
Replace your lens at least once each year. Factory applied protective
coatings on each lens surface will wear off even with gentle cleaning.
Remove the Visor
Remove the center post from the goggle frame by pulling up on the visor and
pushing the post upward from the inside.
Remove the two side posts by carefully pulling on the visor and pushing one post
at a time up from the inside.
[The mask may be removed from the goggle frame with the visor still attached to the
mask at the two side posts.]
Remove the Mask
1
Remove the top right mask post from
the goggle frame.
2
Move clockwise around the mask, removing
the posts one at a time.
3
Grasp the strap retainer with your right
hand and tilt it straight upward.
4
Twist the strap retainer firmly to remove it.
[See figure 1]
5
Slide the strap retainer through the mask.
6
Repeat steps 3-5 for the other side.
WARNING:
Use only your hands when changing DYE
®
lenses.
Use of tools is likely to scratch or damage the lens.
14
1
