background image

Safety Check

WARNING:

The DYE

®

i

3

™ Goggle System suffers wear and stress

even in normal use. Scratches, cracks and discoloration are signs

of stress-caused fatigue and indicate that a part is at the end of its

useful life and needs to be replaced.

Here's a simple, sixty-second safety check. Get in the habit of making this safety

check every time you're about to play paintball.

Before each use, perform a safety check.

1

Look for scratches on the lens and goggle frame.

2

Look for cracks on the lens and goggle frame.

3

Look for discoloration on the lens and goggle frame.

4

Do not use a lens that is scratched, cracked or discolored. 

Replace the lens immediately. 

5

Make sure that the lens is securely attached to the goggle 

frame and that all lens lock tabs are flush to the goggle frame.

6

Make sure that the strap is securely attached to the frame 

(right and left).

7

Make sure the sliding adjustment clips on the strap are 

not cracked or broken.

8

Make sure that the mask is securely attached to the goggle frame.

9

If you use the visor, make sure that the visor is securely 

attached to the goggle frame and mask.

9

Fitting

WARNING:

If your goggle system does not fit properly, it may fall

off. Do not use a goggle system that does not fit snugly.

The DYE

®

i

3

™ Goggle System is not intended for use with eyeglasses.

After you have performed the safety check of the 

entire goggle system, put it on.

The goggle must fit firmly on your face so that it will not move.

Check for gaps between the foam on the goggle frame 

and your face. The goggle must create a seal with your face.

If there are any gaps, the strap is too loose.

Remove the system from your head and shorten the strap 

by moving the two slides evenly apart. The two slides on 

the goggle strap have teeth to retard slipping. These teeth 

prevent proper adjustment while the system is snugly on your head.

Put the system on and again check for gaps.

If there are no gaps but the system feels too tight, remove the 

system from your head and move the two clips evenly together.

10

Содержание INVISION3 i3













Отзывы: