Page
12
Figure 2-3
3. Determine depth of recessed mounting holes relative to the back of the display.
4. Select the proper length of Screws
(6, 8)
that
suit your monitor’s specifications.
Place
the Spacers
(4)
on the back of display, follow by positioning the mounting holes in the
Tilter Mount Bracket so that the mounting holes on the Tilter Mount Bracket and
Spacers
(4)
are aligned
(See Figure 2-2).
5. Using a Philips Screwdriver, install selected Screws
(6, 8)
through mounting holes on
Tilter Mount Bracket and Spacers
(4)
, and into the display monitor. Tighten Screws
with Philip Screwdriver so the Tilter Mount Bracket is firmly attached to the display
monitor. Do not over tighten the Screws. Stop immediately if you encounter any
resistance
(See Figure 2-3)
.
Figure 2-2
