Page
6
Figure 1-1
Step
【
1
】
Wood Wall Installation
Drilling into electrical wires or cables can cause serious personal injury! Always make
certain that the area behind mounting area is free of electrical wires and cables before
drilling or installing.
Improper installation can lead to the mount falling causing severe personal injury or
damage to equipment. It is the
installer’s responsibility to make sure the combined weight
of all components does not exceed weight capacity of 17.6lbs (8Kg). The manufacturer
accepts no responsibility for incorrect installation.
Wood Wall Installation
1. To determine Wall Plate
(2)
mounting height, add 1
” (25.4mm) to the mounting height
from the top of the table (
See Figure 1-1
).
2. Place the Wall Plate
(2)
on the wall. Mark location with pencil (
See Figure 1-2
).
3. Use awl or stud finder to find stud location. Ensure marks are in the center of wood
stud. Drill pilot holes and ensure pilot holes are straight (
See Figure 1-3
).
Wood Pilot
Pilot hole size
Pilot Drill Depth
1/8"
2"
4mm
50mm
