Dyconn Myth Series, Инструкция по эксплуатации

Страница: 7 / 22

Page 6
2. Ensure that the pilot holes are straight and centered on the wooden beam. Proceed to
drill pilot holes
2” into the beam (
See Figure 1-2 ).
3. Insert the Philips Screw ST6.3x65mm (4) through the Washer (9) , Wall Plate (3) and
into the pilot hole. Securely tighten the screws with a Philips screwdriver ( See Figure
1-3 ).
Figure 1-3
Figure 1-2