Dyconn Myth Series, Инструкция по эксплуатации

Страница: 14 / 22

Page 13
Step
【
3
】
Attaching Dual Articulating Arm Assembly
Gas Spring Arms will only work when monitors are properly installed.
Attaching the Dual Articulating Arm Assembly
1. Install the Extension Arms (2) onto the DEK (18) ( See Figure 3-1 ).
2. Place the arm Covers (14) on the pivot points. Place the Phillips Screws M6x12mm
(15) through the Gaskets (16) and into the bottom of the DEK (18) . Securely tighten
screws with a Phillips Screwdriver. Do not over tighten. The arm covers are used to
help secure the extension arms ( See Figure 3-2).
Figure 3-1
Figure 3-2