Dyconn DMS-172, Инструкция по эксплуатации

Страница: 13 / 15

2) As you attach the display, make sure that it is level. Once the display is level, slightly push the
display forward until the rivet screws of universal bracket are inserted into the pillar bracket.
3) First, place the washers onto the rivets and follow by attaching the M8 nuts ( 8 ). Tighten the nuts
using the spanner ( 7 ).
4) To adjust the tilt of +5°/ -15°, loosen the tension knobs on Pillar bracket, and then adjust tilt
position to desired position. Retighten to secure tilt position.