Dyconn DMS-172, Инструкция по эксплуатации

Страница: 14 / 15

1) Place the LT bracket ( 4 ) onto glass shelf ( 5 ). Thread screws M5x12mm ( 12 ) through the bracket
and into the glass shelf. Tighten the screws using a Philips Screwdriver. Do not over tighten the
screws; doing so could result in severe damage to equipment or cause severe personal injury.
2) Hook on the assembled Glass Shelf onto the pillar bracket slot. Once it is in position, proceed to
thread Screws M4x8mm ( 13 ), through the M4 washer ( 11 ) and into the pillar bracket slot. Tighten
the screws with a Phillips screwdriver until the glass shelf is firmly secured to the pillar.