Page
9
Figure 2-3
Figure 2-4
3. Determine depth of recessed mounting holes relative to back of surface of display.
4. Select proper length of Screws
(6
、
8)
place the Spacers
(4)
on the back of display,
follow by position and orient the mounting holes in the Tilter Mount Bracket so that the
mounting holes on the Tilter Mount Bracket and Spacers
(4)
are aligned.
(See Figure
2-3)
5. Using Philip Screwdriver, install selected Screws
(6
、
8)
through mounting holes on
Tilter Mount Bracket and Spacers
(4)
, finally into the display monitor. Tighten Screws
with Philip Screwdriver so the Tilter Mount Bracket is firmly attached to the display
monitor. Do not over tighten the Screws. Stop immediately if you encounter any
resistance.
(See Figure 2-4)
Note
: All Spacers or Screws used should be the same length.
Содержание Butterfly DE500D-C
Страница 1: ......
Страница 4: ...Page 4 Supplied Parts ...
Страница 13: ...Page 13 Figure 4 3 3 Use the supplied Cable Clip 14 to secure display cable to the pole See Figure 4 3 ...
Страница 16: ...Page 16 Figure 5 5 ...
