Dyconn Butterfly DE500D-C, Инструкция по эксплуатации, Страница: 8 / 19

Page 8
Figure 2-1
Figure 2-2
Step
【
2
】
Display Installation
Using improper screws or screw size may damage your display. If spacers are required,
be sure to use correct size of screws. Proper screws will easily and completely thread into
the display mounting holes. Inadequate thread engagement in the display may cause
display to fall.
It is installer’s responsibility to make sure the combined weight of all components does not
exceed weight capacity. Exceeding weight capacities can result in severe personal injury
or damage to equipment. It is installer’s responsibility to make sure the combined weight
of all components does not exceed weight capacity of 18Kg (39.6lbs)
Desk Mount LCD Arm will only work when a display is properly installed.
Attaching the Display
1. Ensure Tilter Mount Bracket of LCD Arm Assembly is able to swivel and tilt easily.
( See Figure 2-1 ) Adjust as required before proceeding to next step.
2. Carefully place the display face down on protective surface.(
See Figure 2-2 )