English - 1
Control Panel
(depending on the model)
➢
The product colour and shape may vary depending on the
model.
You can use the
3
buttons to switch the TV on when it is
in standby mode depending on the model.
The
2
and
3
buttons also have the same function as the
◄/►/▲/▼ buttons on the remote control.
If the remote control no longer works or you have
misplaced it, you can use the controls on the panel of the
television.
COLOUR TELEVISION
AA68-03905A-06
Owner’s Instructions
Before operating, please read this manual thoroughly,
and retain it for future reference.
Register your product at www.samsung.com/global/register.
Record your Model and Serial number.
▪ Model __________ ▪ Serial No. __________
CS 21Z30/21Z40/21Z45/21Z50/
21Z57/21Z58/21K40/21M40/
21E22/21A530/21A730
Connection Panel
(depending on the model)
➢
The product colour and shape may vary depending on the model.
☛
Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
☛
Please be sure to match the colour coded input terminals and
cable jacks.
continued...
Connecting to the RCA Input
The
1
(
AUDIO-L/R
or
AUDIO
) and
2
(
VIDEO
) connectors
are used for equipment, such as a camcorder, video disc
player, or video game device.
Connecting Headphones
The
3
(headphone) jack is used for watching a television
programme without disturbing the other people in the room.
Prolonged use of headphones at a high volume may damage
your hearing.
➢
When both the front (or side) AV and rear connectors are
connected to external equipment, the front (or side) AV
receives priority.
Front (or Side) Panel
1
On-screen menu display
2
Volume adjustment
3
Channel selection
4
Remote control sensor
5
Standby indicator
6
Power on/off
Rear Panel
cable television
network
or
Front (or Side) Panel
Connecting to an Aerial or Cable Television Network
Connect the aerial or network input cable to the
1
(75 Ω coaxial
socket). To view television channels correctly, a signal must be
received by the set from one of the sources: an outdoor aerial,
cable television network, or satellite network. If you are using
an indoor aerial, you may need to adjust it when tuning your
television until you obtain a picture that is both sharp and clear.
Connecting to the RCA Output
The RCA
2
connectors are used for equipment, such as a
recording VCR or audio system.
Connecting to the RCA Input
The RCA
3
connectors are used for equipment, such as a VCR,
DVD, decoder, satellite receiver, video game device, or video
disc player. (When using the mono equipment, connect to the
AUDIO-L
input connector.) The RCA
4
connectors are used for
equipment such as a DVD with component output (480i/576i).
cable television
network
or
cable television
network
or
cable television
network
or
1
2
1
2
3
1
Audio input
2
Video input
3
Headphone jack
1
2
3
AA68-03905A-06Eng.indd 1
2008-01-10 ¿ÀÀü 11:35:25
