FS20W
8
3. Quick operation and pay attention to
Pay attention to before operate
：
1
）
For the first time using machine, operator should be trained.
2
）
in the process of the replacement of the new, the original operator or supervisor to deal
with the new operator to carry out training to teach the operation and attention to matters,
to avoid unnecessary accidents.
3
）
understand, familiar with the place, determine the route of machine, to complete in
easiest and safest.
4
）
Check the battery capacity (the new machine or a longer period of time without the use
of the machine will be full of electricity before use).
5
）
choose brush or cleaning pad according floor situation
Preparation
1
）
choose super concentrated industrial floor cleaning agent supplied according to floor
pollution state:
Normally, only mix 1/4 cup(the normal one time using
paper cup) detergent into 1 tank water. (as the right figure shows)
2
）
join detergent from former water injection
nozzle, then start to fill water into solution
tank.
if use bucket, you could pour water from
In order to protect the environment, please try
to reduce the amount of detergent! please use
neutral low foam detergent! join defoaming
agent when use detergent, to eliminate foam in
recovery tank, to prevent foam overflow and
burn suction motor!
The purpose of cleaning is to remove the surface dirt on the premise of
protecting the ground, brush, pad selection is not appropriate may hurt
your ground, please pay attention!
Adding water mouth
Lid of clear water tank
