manualshive.com logo in svg

Dycon DC23, Руководство по эксплуатации горячей линии, Страница: 21 / 25

Поделиться
Скачать
Dycon DC23 Скачать руководство пользователя страница 21

helpline manual

21

Turbine head brush bar not operating

The brush bar will stop rotating if it becomes obstructed. The brush bar will operate immediately, once the obstruction is cleared.

Press the release catch and remove 
the turbine head. Ask the customer 
to check the suction on the end of the 
wand handle. If weak go to section 1 
on p.18, if strong continue with these 
checks.

Turn machine OFF and remove turbine 
head. Check inlet plunger for dust/
debris. Check inlet seal for damage.

Undo both soleplate fasteners, release 
the locking tab. Lift and remove the 
soleplate.

Pull the brush bars out from the 
turbine head. Using scissors, carefully 
cut away any hair or threads from the 
brush bar.

Check the turbine duct for blockages. 
Check the metal spindles are rotating 
freely. 

Position the brush bars back into the 
turbine ensuring the arrows on the 
brush bars are aligned with the arrow 
on the shaft.

Refit the soleplate and secure locking 
tab.

Check that the soleplate is fitted flush 
against the housing with no visible 
gap.

1

5

6

4

9

8

7

Ask the customer to plug machine in 
and test that brush bar is spinning and 
the plunger is working. If not working 
send new turbine head.

2

3

Plunger

Inlet seal

Содержание DC23


























Отзывы:

Нет отзывов