D2366 GSM Radio Signal Analyser – Operation Manual – D2366-OPS2/EU/F10/v4 -
14
Operation – MONITOR
It displays the base station with the strongest signal on the selected network. The readings are
updated every 6 seconds.
Swap between Summary (basic) and Detailed
views (only available in Engineer mode - see next
page)
Go to Main menu
(see page 8)
When SIM card is fitted = no action
When SIM car is absent = lock onto selected
network
First highlight the network required (use left
button), then... press the right button to select.
Wait (1 minute maximum).
When SIM card is fitted = no action
When SIM card is absent = highlight Network
Press repeatedly to highlight the required network,
then press the right button to select.
To obtain the list of network operators, select
Network Search
by pressing the left arrow, then
press the right arrow.
To return to auto mode after having selected a
particular network operator, select
Auto
and press
the right arrow.
Summary (basic) View
The displayed cell is the strongest on the selected network. The display is updated every 6
seconds. As the aerial is moved, then a different, stronger cell may be displayed.
GSM
900 or 1800 MHz
The radio frequency band used by the displayed cell
Radio signals using 900MHz penetrate better into buildings
SIG
FSSI Signal Strength
Shown as percentage - 33% and higher is useable.
CELL
Cellular identification number of the cell
BAT
% = charge remaining in battery – 100% = fully charged
EXT = charger connected
SIM
Not Fitted or Status
Surveyor Mode
Engineer Mode (Advanced ON)
